| Manufacturer |
John Deere |
| Model |
622R |
| Cutterbar |
|
| Type |
4-in. knife system with in-line gearbox |
| Cutterbar angle |
14 degrees |
| Cutterbar length, ft. (m) |
18 (5.5) |
| Tilt adjustment |
17 degrees (located on feederhouse) |
| Knife sections |
Heavy-duty, over-serrated |
| Guards |
Forged steel, heat-treated |
| Knife Speed |
520 cycles/min. |
| Slat Reel |
|
| Number of slats |
5 |
| Diameter, in. (mm) |
40 (1016) |
| Pickup Reel |
|
| Number of slats |
6 |
| Diameter, In. (mm) |
42 (1067) |
| Reel Controls |
|
| Height control |
Hydraulic |
| Speed control |
Hydraulic |
| Operating speeds |
6 - 44 rpm |
| Platform Auger |
|
| Diameter, in. (mm) |
26 (660) |
| Operating speed |
152 rpm, 135 rpm (slow down), 170 rpm (speed up) |
| Hydraulics |
|
| Reel motor displacement (per revolution), cu. in. (L) |
11.9 (0.196) |
| Reel drive system pressure, psi (kPa) |
2000 +/- 150 (14000 +/- 1000) |
| Reel fore/aft stroke, in. (mm) |
14.1 (359) |
| Dimensions |
|
| Cutting width, ft. (m) |
22 (6.7) |
| Gathering width, ft. (m) |
22.25 (6.8) |
| Overall width, ft. (m) |
23.1 (7.0) |
| Approximate weight, lb. (kg) |
4287 (1945) |
