Specifications: 7350 available from Washington Tractor, WA

 
Specifications: 
MANUFACTURER John Deere
MODEL 7350
Engine  
Make John Deere PowerTech Plus™
Displacement, cu. in. (L) 824 (13.5)
Configuration inline 6, wet sleeve
Fuel Capacity, U.S. gal. (L) 185 (700)
Cooling system, U.S. gal. (L) 15.9 (60)
Transmission, U.S. gal. (L) 3.43 (13)
Final Drives, U.S. gal. (L) 2.24 (8.5)
Power @ 1900 rpm, hp (ECE R24) ---
Power @ 2100 rpm, hp (ECE R24) ---
Footnote ---
Power @ 1900 rpm, hp (ECE R120) 470
Power @ 2100 rpm, hp (ECE R120) 445
Footnote ---
Feeding System  
Number of Feedrolls 4
Width of Housing, in. (mm) 26.9 (683)
Metal Detector standard
Harvesting Unit Drive 2 speed
No. of length-of-cut changes, in. (mm) ---
Optional Cutterhead ---
Cutterhead  
Type Enclosed straight knife holders
Width, in. (mm) 26.9 (683)
Width - Shearbar surface, in. (mm) ---
Diameter, in. (mm) 24 (610)
Speed, rpm 1000
No. of knives 40 or 48
Knife Sharpening  
Reverse rotation yes
Automatic from cab standard
Reverse drive hydraulic motor
Reverse speed, rpm 300-600
Kernel Processor  
Optional yes
Removal of knives ---
Roll diameter, in. (mm) 8.5 (216)
Roll speed (upper), rpm 3921
Roll speed (lower), rpm 3233
Roll spacing, in. (mm) 0.03125-1.2 (1-30)
Weight, lb. (kg) 732 (328)
Quick-Change yes
Row-Track Guidance  
Blower  
Diameter, in. (mm) 18 (450)
Width, in. (mm) 20 (506)
Standard speed, rpm 1800
Optional speed, rpm 2000
Number of paddles 12
Spout  
Rotation, degrees 200
Hydraulic height position yes
Double-cap deflection yes
No. of wear liners 3
Electrical system  
Type 12 volt with 150 amp alternator
Batteries 1
Propelling Drive  
Transmission  
Maximum ground speed, mph(km/h)  
Main Clutch  
Rear Axle  
Weight, lb. (kg)  
With kernel processor and power rear axle 24,868
   
Specifications are based on published information at the time of publication. Specifications are subject to change without notice. Contact your local John Deere dealer for more information.  
   
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company, unless otherwise noted.