| Manufacturer | John Deere |
| Model |
896 |
| Windrower |
|
| Compatibility |
A400 and R450 Windrowers |
| Formation |
Adjustable swathboard (plus adjustable forming shields on windrower) |
| Cutterbar |
|
| Drive |
Timed dual knife |
| Speed |
1800 strokes per minute |
| Guards |
Two-tine, double-hardened steel (induction-hardened ledger surface and knifeback support) |
| Knife (chrome) |
Overserrated [twin point (for non-clog guards only), course serrated, and extra-course serrated sections available through Parts] |
| Mechanical Driven Reel |
|
| Adjustable |
Up and down, fore and aft |
| Tooth bars |
Five high-density tooth bars and five reel bats |
| Speed |
66 or 74 rpm; optional, 58 or 62 and 70 or 78 rpm |
| Diameter, in. (mm) |
42 (1067) |
| Drive |
Chain and V-belt with spring-loaded double idler |
| Hydraulically Driven, Variable-Speed Reel |
|
| Adjustable |
Up and down, fore and aft |
| Tooth bars |
Five high-density tooth bars and five reel bats |
| Variable speed, rpm |
35 to 78 |
| Diameter, in. (mm) |
42 (1067) |
| Drive |
Hydraulic |
| Augers |
|
| Diameter |
--- |
| Upper, in. (mm) |
9 (229) |
| Lower, in. (mm) |
11 (279) |
| Drive |
--- |
| Upper |
Enclosed #80 chain, running in oil |
| Lower |
Enclosed #60 chain, running in oil |
| Speed |
--- |
| Upper, rpm |
477 rpm |
| Lower, rpm |
425 rpm |
| Urethane Conditioner Rolls |
|
| Type |
Urethane with intermeshing, intermittent recessed cleats |
| Diameter, in. (mm) |
10 (254) |
| Speed, rpm |
689 |
| Length, in. (mm) |
100 (2540) |
| Drive |
Enclosed gear and shaft drive |
| Angled-Steel Conditioner Rolls |
|
| Type |
Steel rolls with 10 V shaped steel flutes |
| Diameter, in. (mm) |
10 (254) |
| Speed, rpm |
689 |
| Length, in. (mm) |
100 (2540) |
| Drive |
Enclosed gear and shaft drive |
| Dimensions |
|
| Platform cutting width, ft.-in. (m) |
14-ft.-14-3 (4.3); 16-ft.-16-3 (5); 18-ft.-18-3 (5.6) |
| Platform overall width, ft.-in. (m) |
14-ft.-15-6 (4.7); 16-ft.-17-6 (5.3); 18-ft.-19-6 (5.9) |
| Platform weight, lb. (kg) |
14-ft.-4123 (1870); 16-ft.-4412 (2001); 18-ft.-4792 (2174) |
| Windrow width (depending on crop conditions), in. (mm) |
34 to 92 (864 to 2334) |
| Specifications are based on published information at the time of publication.Specifications are subject to change without notice. |
|
| |
|
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted. |
|
