| Manufacturer |
John Deere |
| Model |
2210 Floating-Hitch |
| Fold |
|
| Type |
3-section, 3-section low transport, 5 section |
| Working widths |
|
| Rigid frame |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Rigid over-center fold |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| 3-section |
--- |
| Option 1 |
23-ft. 6-in. to 38-ft. 6-in. (12-ft. mainframe) |
| Option 2 |
34-ft. 6-in. to 38-ft. 6-in. (15-ft. mainframe) |
| Option 3 |
40-ft. 11-in. to 45-ft. 7-in. (15-ft. mainframe with low transport option) |
| Option 4 |
--- |
| Option 5 |
--- |
| Option 6 |
--- |
| 5-section |
--- |
| Option 1 |
43-ft. 6-in. to 55-ft. 6-in. (12-ft. mainframe) |
| Option 2 |
46-ft. 6-in. to 64-ft. 6-in. (15-ft. mainframe) |
| Option 3 |
--- |
| Option 4 |
--- |
| Transport width |
|
| Rigid frame |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| 3-section |
--- |
| Option 1 |
16-ft. 5-in. (12-ft. mainframe) |
| Option 2 |
19-ft. 5-in. (15-ft. mainframe) |
| Option 3 |
19-ft. 5-in. (15-ft. mainframe with low transport option) |
| Option 4 |
--- |
| Option 5 |
--- |
| Option 6 |
--- |
| 5-section |
--- |
| Option 1 |
16-ft. 8-in. (12-ft. mainframe) |
| Option 2 |
19-ft. 7-in. (15-ft. mainframe) |
| Option 3 |
--- |
| Option 4 |
--- |
| Transport height |
|
| Rigid frame |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Rigid over-center fold |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| 3-section |
--- |
| Option 1 |
10-ft. 4-in. to 17-ft. 7-in. (12-ft. mainframe) |
| Option 2 |
14-ft. 3-in. to 15-ft. 8-in. (15-ft. mainframe) |
| Option 3 |
14-ft. 3-in. (15-ft. mainframe with low transport option) |
| Option 4 |
--- |
| Option 5 |
--- |
| Option 6 |
--- |
| 5-section |
--- |
| Option 1 |
14-ft. to 16-ft. (12-ft. mainframe) |
| Option 2 |
14-ft. 1-in. to 17-ft. 1-in. (15-ft. mainframe) |
| Option 3 |
--- |
| Operating depth |
|
| Inches |
to 5-in. |
| Operating speed |
|
| Miles per hour |
5 to 8 mph |
| Horsepower required |
|
| Horsepower per foot (hp/ft.) |
4-8 PTO hp/ft. (200 lb. shanks may require 1-2 more hp/ft.) |
| Depth control |
|
| Option 1 |
Single Point |
| Option 2 |
AccuDepth |
| Option 3 |
--- |
| Hydraulic requirements |
|
| Standard |
2 SCVs (lift and fold) at 2500 psi for optimum raise times |
| Option 1 |
--- |
| Option 2 |
--- |
| Electrical requirements |
|
| Standard |
9-pin connector for warning lights and Accudepth |
| Option 1 |
--- |
| Option 2 |
--- |
| Hitch |
|
| Type |
Floating T-hitch |
| Frame |
|
| Tubing |
4 x 4-in. high-strength, box beam steel cross tubes through 3X6-in. and 2X5-in. steel fore-aft tubes (patented Tube-Thru-Tube design), welded construction |
| Number of ranks |
5 |
| Fore-and-aft |
134-in. |
| Underframe clearance |
24-in. |
| Standard spacing |
|
| Inches |
4.5, 6, 9-in. |
| Standard options |
|
| Option 1 |
Tru-Position C-Shank |
| Spec |
5/8 X 1-3/4-in. |
| Trip force, lb. |
150 |
| Trip height, in. |
10 |
| Maximum operating depth, in. |
5 |
| Underframe clearance, in. |
24 |
| Spacing |
6, 9-in. |
| Option 2 |
Tru-Position C-Shank |
| Spec |
3/4 X 1-3/4-in. |
| Trip force, lb. |
200 |
| Trip height, in. |
10 |
| Maximum operating depth, in. |
5 |
| Underframe clearance, in. |
24 |
| Spacing |
6, 9-in. |
| Option 3 |
S-tine |
| Spec |
1/2 X 1-3/4-in. |
| Trip force, lb. |
--- |
| Trip height, in. |
--- |
| Maximum operating depth, in. |
--- |
| Underframe clearance, in. |
24 |
| Spacing |
4 1/2-in. |
| Option 4 |
N/A |
| Spec |
--- |
| Trip force, lb. |
--- |
| Trip height, in. |
--- |
| Maximum operating depth, in. |
--- |
| Underframe clearance, in. |
--- |
| Spacing |
--- |
| Ground-engaging components |
|
| Options |
Wide variety of sweeps, shovels, and points |
| Centerframe depth control wheels and tires |
|
| Option 1 |
Walk-Over Tandems (4) 9.5L-15FI load range D tires (20-ft. 6-in. to 38-ft. 7-in. ) |
| Option 2 |
Walk-Over Tandems (4) 11L-15FI load range D tires (40-ft. 6-in. through 45-ft. 7-in.) |
| Option 3 |
Castering front with (2) 11L-15FI load range D tires and Walk-Over tandem rear with (4) 12.5L-15FI load range F tires (5-section - 43-ft. 3-in. to 55-ft. 9-in.) |
| Option 4 |
Castering front with (2) 12.5L-15FI load range F tires and Walk-Over tandem rear with (4) 12.5L-15FI load range F tires(5-section - 46-ft. 5-in. to 64-ft. 6-in.) |
| Option 5 |
--- |
| Wing frame wheels and tires |
|
| Option 1 |
Walk-Over Tandems (4) 9.5L-15FI load range D tires |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Stabilizer wheels |
|
| Option 1 |
(2) 9.5L-15FI tires on front stabilizer wheels (low transport models) |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
| Spike tooth harrow |
|
| Option 1 |
5-bar spike-tooth harrow |
| Rank spacing |
--- |
| Spike spacing |
10-in. |
| Effective spacing |
2-in. |
| Spike dimension |
.75 x .75 x 10-in long |
| Angle |
30 or 45 degrees |
| Adjustments |
angle |
| Option 2 |
N/A |
| Rank spacing |
--- |
| Spike spacing |
--- |
| Effective spacing |
--- |
| Spike dimension |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Option 3 |
--- |
| Rank spacing |
--- |
| Spike spacing |
--- |
| Effective spacing |
--- |
| Spike dimension |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Coil tine harrow |
|
| Option 1 |
3-bar coil-tine harrow |
| Rank spacing |
12-in. |
| Tine spacing |
9-in. |
| Effective spacing |
3-in. |
| Tine dimensions |
.438-in. x 16-in. |
| Angle |
6 choices from aggressive to shallow |
| Adjustments |
down pressure, height (no soil engagement option), pitch, and angle adjustment |
| Option 2 |
4-bar coil-tine harrow |
| Rank spacing |
12-in. |
| Tine spacing |
9-in. |
| Effective spacing |
2.25-in. |
| Tine dimensions |
.438-in. x 16-in. |
| Angle |
6 choices from aggressive to shallow |
| Adjustments |
down pressure, height (no soil engagement option), pitch, and angle adjustment |
| Option 3 |
N/A |
| Rank spacing |
--- |
| Tine spacing |
--- |
| Effective spacing |
--- |
| Tine dimensions |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Rolling basket harrow |
|
| Option 1 |
2-bar coil tine harrow with rolling basket |
| Spike/tine |
2-bars of coil tines |
| Rank spacing |
12-in. |
| Spike/tine spacing |
9-in. |
| Effective spacing |
4.5-in. |
| Spike/tine dimensions |
.438-in. x 16-in. |
| Basket |
no center shaft |
| Basket diameter |
14-in. |
| Bar type |
spiraling rods |
| Bar size |
.875-in. |
| Bearings |
Dura-Flex (3+1) bearings eliminate the need for gang bolt, spacers, washer, and wide bearings and mounts |
| Adjustments |
tine tooth angle, basket down pressure |
| Option 2 |
3-bar spike with rolling basket |
| Spike/tine |
3-bar spike |
| Rank spacing |
--- |
| Spike/tine spacing |
10-in. |
| Effective spacing |
3.33-in. |
| Spike/tine dimensions |
.75 x .75 x 10-in. |
| Basket |
spiral arrangement |
| Basket diameter |
11-in. |
| Bar type |
flat bar |
| Bar size |
--- |
| Bearings |
Dura-Flex bearings with triple-lip seals on the inner race plus a wide seal between the bearing and flange. The bearings are self-aligning and greaseable for longer life. |
| Adjustments |
30 or 45 spike degree and 4 positions for basket down pressure |
| Option 3 |
N/A |
| Spike/tine |
--- |
| Rank spacing |
--- |
| Spike/tine spacing |
--- |
| Effective spacing |
--- |
| Spike/tine dimensions |
--- |
| Basket |
--- |
| Basket diameter |
--- |
| Bar type |
--- |
| Bar size |
--- |
| Bearings |
--- |
| Adjustments |
--- |
| Rear hitch |
|
| Description |
--- |
| Tubing size |
--- |
| Telescoping |
yes |
| Tongue weight rating |
1000 lb |
| SS |
6500 |
| Wiring harness for transport lights |
--- |
| Hydraulic hoses and couplers |
one set |
| Warranty |
|
| Description |
3-year frame and standard warranty |
| Additional feature |
|
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
