Specifications: 5045E available from Washington Tractor, WA

 
ManufacturerJohn Deere
Model 5045E
Key Specifications  
Official Test Nebraska Test Number Factory Observed
Engine Manufacturer John Deere PowerTech 3029
Performance Advertised PTO HP (kW) @ Rated RPM 37 (27.3) @ 2400 per SAE
Transmission Std. Transmission; Forward/Reverse 9F/3R SyncShuttle
Power Take-Off (PTO) Standard Independent 540
Hydraulics Type Open Center
Final Drive Type Planetary
MFWD Dimensions Wheelbase, in. (mm) 80.7 (2,050)
Miscellaneous Country of Manufacture Pune, India
Official Test  
Nebraska Test Number Factory Observed
Engine  
Manufacturer John Deere PowerTech 3029
Aspiration Turbocharged
Cylinders/Displacement, cu. in. (liters) 3/179 (2.9)
Cylinder Liners Wet Sleeved
Fuel Tank Cap., US Gal. (L) (Open; Cab) ---
Standard 18.0 (68.0)
Optional ---
Underhood muffler Yes
Performance  
Advertised PTO HP (kW) @ Rated RPM 37 (27.3) @ 2400 per SAE
Official PTO HP (kW) @ Rated RPM ---
@ Standard PTO @ Eng RPM ---
Maximum @ Eng RPM ---
Advertised Engine HP (kW) @ Rated Speed 45 (33.1) @ 2400 per ISO 97/68/EC
Max Unballast Drwbr HP (kW) @ Eng RPM ---
Maximum Torque (PTO) @ RPM, lb-ft (Nm) ---
Max Torque Rise (80% Rtd Spd) @ Eng RPM ---
Maximum Torque Rise % (PTO) @ Eng RPM ---
Fuel Use, U.S. gal./hr. & HP hr./gal. at:  
PTO @ Rated Eng RPM ---
Standard PTO Speed @ Eng Speed ---
Maximum PTO Power @ Eng RPM ---
Maximum Engine Power @ Eng RPM ---
Max Unballasted Drawbar Power @ Eng RPM ---
75% Load, Full Engine RPM (Unballasted) ---
75% Load @ Reduced RPM (Unballasted) ---
Transmission  
Std. Transmission; Forward/Reverse 9F/3R SyncShuttle
Opt. Transmission; Forward/Reverse ---
Reverser No
On-the-Go Shifting (Yes/No/Partial) Partial
Clutch; Wet/Dry Dry
Creeper ---
Power Take-Off (PTO)  
Standard Independent 540
Optional ---
PTO Speeds @ Engine RPM 540 @ 2400
PTO Actuation Mechanical (lever)
Hydraulics  
Type Open Center
Pump Rated Output, GPM (L/min.) ---
Standard 18.2 (68.9)
Optional ---
Rated Flow @ One SCV, GPM (L/min.) 11.4 (43.1)
Max Output @ SCV Couplers, GPM (L/min.) ---
Maximum Operating Pressure, PSI (kPa) ---
Maximum Hydraulic Power, HP (kW) ---
Hitch Draft Control Load Sense Type Mechanical
Remote Control Valves Available 1 (2 opt.)
Hitch Category (SAE Designation) 2 ; convertible to 1
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. ---
OECD ---
Standard ---
Optional ---
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) ---
Standard 3192 (1447)
Optional ---
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) ---
Standard ---
Optional ---
Sensing Type Top Link
Joystick SCV Control Optional
Final Drive  
Type Planetary
Differential Controls Mechanical (Pedal)
Availability ---
Front No
Front & Rear No
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flanged
Brakes, Type and Control Hydraulic Wet Disc
Operator Station  
Rollover Protective Structure, OOS ---
Rigid - Foldable - Telescopic Foldable, 2-Post
Platform - Flat/Straddle Straddle
Gearshift Location - Console/Floor Floor
Cab ---
Doors ---
Platform - Flat/Straddle ---
dB(A) Rating ---
Seat Suspension System ---
2WD Dimensions  
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab ---
MFWD Dimensions  
Wheelbase, in. (mm) 80.7 (2,050)
Front Tread Range, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft. (m) 11.6 (2.94)
Turning Radius w/o Brakes, ft. (m) 14.3 (3.63)
Limited Slip Differential ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab 5070 (2300)
4WD Dimensions  
Wheelbase, in. (mm) ---
Wheel Tread, Min. to Max. in. (mm) ---
Turning Radius w/o Brakes, ft. (m) ---
Nebraska Test Unballasted w/Duals, lb.(kg) ---
Unballasted Weight, lb. (kg) ---
Standard Tires  
2WD ---
Front ---
Rear ---
MFWD ---
Front 8.3 - 24
Rear 13.6 - 28
4WD ---
Track Widths ---
Miscellaneous  
Country of Manufacture Pune, India
Ballasting Restrictions, lb. (kg) ---
*Notes Updated: 06/08/2009
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.  
   
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.