| Manufacturer | John Deere |
| Model |
5095MH |
| Official Test |
|
| Nebraska Test Number |
Factory Observed |
| Engine |
|
| Manufacturer |
John Deere PowerTech PWX |
| Aspiration |
Turbocharged |
| Cylinders/Displacement, cu. in. (liters) |
4/276 (4.5) |
| Cylinder Liners |
Sleeved |
| Fuel Tank Cap., US Gal. (L) (Open; Cab) |
--- |
| Standard |
36.7 (139); 36.7 (139) |
| Optional |
--- |
| Underhood muffler |
Yes |
| Performance |
|
| Advertised PTO HP (kW) @ Rated RPM |
85 (63.4) @ 2100 per SAE |
| Official PTO HP (kW) @ Rated RPM |
--- |
| @ Standard PTO @ Eng RPM |
--- |
| Maximum @ Eng RPM |
--- |
| Advertised Engine HP (kW) @ Rated Speed |
100 (74.6) @ 2200 per ISO 97/68/EC |
| Max Unballast Drwbr HP (kW) @ Eng RPM |
--- |
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
372 @ 1600 |
| Max Torque Rise (80% Rtd Spd) @ Eng RPM |
--- |
| Maximum Torque Rise % (PTO) @ Eng RPM |
26 @ 1600 |
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
| PTO @ Rated Eng RPM |
--- |
| Standard PTO Speed @ Eng Speed |
--- |
| Maximum PTO Power @ Eng RPM |
--- |
| Maximum Engine Power @ Eng RPM |
--- |
| Max Unballasted Drawbar Power @ Eng RPM |
--- |
| 75% Load, Full Engine RPM (Unballasted) |
--- |
| 75% Load @ Reduced RPM (Unballasted) |
--- |
| Transmission |
|
| Std. Transmission; Forward/Reverse |
12F/4R SyncShuttle Plus |
| Opt. Transmission; Forward/Reverse |
16F/16R PowrReverser |
| Reverser |
Right Hand, Mechanical |
| On-the-Go Shifting (Yes/No/Partial) |
Partial |
| Clutch; Wet/Dry |
Wet |
| Creeper |
12F/4R SyncShuttle Plus, 16F/16R PowrReverser |
| Power Take-Off (PTO) |
|
| Standard |
Independent 540/540 Economy |
| Optional |
540/540E/1000 |
| PTO Speeds @ Engine RPM |
540 @ 2100; 540E @ 1645 |
| PTO Actuation |
Electrohydraulic |
| Hydraulics |
|
| Type |
Open Center |
| Pump Rated Output, GPM (L/min.) |
--- |
| Standard |
24.7 (93.6) |
| Optional |
--- |
| Rated Flow @ One SCV, GPM (L/min.) |
18.4 (69.9) |
| Max Output @ SCV Couplers, GPM (L/min.) |
--- |
| Maximum Operating Pressure, PSI (kPa) |
2900 (20000) |
| Maximum Hydraulic Power, HP (kW) |
31.1 (23.2) |
| Hitch Draft Control Load Sense Type |
Mechanical or Electrohydraulic |
| Remote Control Valves Available |
0 (opt. 3) |
| Hitch Category (SAE Designation) |
2; convertible to 1 |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
--- |
| OECD |
--- |
| Standard |
4793 (2174) |
| Optional |
5935 (2692) |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Sensing Type |
Lower Link |
| Joystick SCV Control |
Optional |
| Final Drive |
|
| Type |
Inboard Planetary |
| Differential Controls |
Mechanical (pedal) |
| Availability |
--- |
| Front |
No |
| Front & Rear |
No |
| Engage On-the-Go Rear Differential Lock |
Yes |
| Axle Type |
Flanged |
| Brakes, Type and Control |
Hydraulic Wet Disc |
| Operator Station |
|
| Rollover Protective Structure, OOS |
--- |
| Rigid - Foldable - Telescopic |
Foldable, 2-Post |
| Platform - Flat/Straddle |
Flat |
| Gearshift Location - Console/Floor |
Floor |
| Cab |
--- |
| Doors |
2 |
| Platform - Flat/Straddle |
Flat |
| dB(A) Rating |
80 |
| Seat Suspension System |
Mechanical (opt. Air Ride) |
| 2WD Dimensions |
|
| Wheelbase, in. (mm) |
--- |
| Front Tread Range, in. (mm) |
--- |
| Rear Tread Range, in. (mm) |
--- |
| Minimum Rear Tread Setting, in. (mm) |
--- |
| Front Axle Clearance, in. (mm) |
--- |
| Turning Radius w/Brakes, ft. (m) |
--- |
| Turning Radius w/o Brakes, ft. (m) |
--- |
| Unballasted Operating Weight, lb. (kg) |
--- |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
--- |
| MFWD Dimensions |
|
| Wheelbase, in. (mm) |
90.6 (2301.24) |
| Front Tread Range, in. (mm) |
52.8 - 75.0 (1340 - 1904) |
| Front Axle Clearance, in. (mm) |
27.3 (69.3) |
| Turning Radius w/Brakes, ft. (m) |
12.8 (3.9) |
| Turning Radius w/o Brakes, ft. (m) |
14.4 (4.4) |
| Limited Slip Differential |
Yes |
| Unballasted Operating Weight, lb. (kg) |
--- |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
7700 (3493); 8400 (3810) |
| 4WD Dimensions |
|
| Wheelbase, in. (mm) |
--- |
| Wheel Tread, Min. to Max. in. (mm) |
--- |
| Turning Radius w/o Brakes, ft. (m) |
--- |
| Nebraska Test Unballasted w/Duals, lb.(kg) |
--- |
| Unballasted Weight, lb. (kg) |
--- |
| Standard Tires |
|
| 2WD |
--- |
| Front |
--- |
| Rear |
--- |
| MFWD |
--- |
| Front |
230/95R40 R1 |
| Rear |
230/95R40 R1 |
| 4WD |
--- |
| Track Widths |
--- |
| Miscellaneous |
|
| Country of Manufacture |
Augusta, GA |
| Ballasting Restrictions, lb. (kg) |
--- |
| *Notes |
Updated 9/30/2008 |
| Specifications are based on published information at the time of publication.Specifications are subject to change without notice. |
|
| |
|
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted. |
|
