| Manufacturer | John Deere |
| Model |
6140D |
| Key Specifications |
|
| Official Test Nebraska Test Number |
Nebr. OECD Test 1951, Summary 633 |
| Engine Manufacturer |
John Deere 4.5L PowerTech E (2 valve) |
| Performance Advertised PTO HP (kW) @ Rated RPM |
115 (85.8) @ 2100 per SAE |
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: PTO @ Rated Eng RPM |
7.21 (27.28) & 16.14 (3.18) @ 2098 |
| Transmission Std. Transmission; Forward/Reverse |
9F/9R PowrReverser |
| Power Take-Off (PTO) Standard |
Independent 540/1000 |
| Hydraulics Type |
Open-Center |
| Final Drive Type |
Inboard Planetary |
| Operator Station Rollover Protective Structure, OOS |
Yes |
| MFWD Dimensions Wheelbase, in. (mm) |
91 (2310) |
| Miscellaneous Country of Manufacture |
Saltillo, Mexico |
| Official Test |
|
| Nebraska Test Number |
TBD-Nebraska Test |
| Engine |
|
| Manufacturer |
John Deere 4.5L PowerTech E (2 valve) |
| Aspiration |
Turbocharged & Intercooled |
| Cylinders/Displacement, cu. in. (liters) |
4/276 (4.5) |
| Cylinder Liners |
Wet |
| Fuel Tank Cap., US Gal. (L) (Open; Cab) |
--- |
| Standard |
41.7 (158) |
| Optional |
N/A |
| Underhood muffler |
Yes |
| Performance |
|
| Advertised PTO HP (kW) @ Rated RPM |
115 (85.8) @ 2100 per SAE |
| Official PTO HP (kW) @ Rated RPM |
116.32 (86.74) @ 2098 per SAE |
| @ Standard PTO @ Eng RPM |
117.18 (87.38) @ 2065 per SAE |
| Maximum @ Eng RPM |
117.41 (87.55) @ 2048 per SAE |
| Advertised Engine HP (kW) @ Rated Speed |
136 (101.3) @ 2100 per ISO 97/68/EC |
| Max Unballast Drwbr HP (kW) @ Eng RPM |
99.37 (74.10) @ 2053 |
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
344 (467) @ 1598 |
| Max Torque Rise (80% Rtd Spd) @ Eng RPM |
15.0% @ 1699 |
| Maximum Torque Rise % (PTO) @ Eng RPM |
18.2% @ 1598 |
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
| PTO @ Rated Eng RPM |
7.21 (27.28) & 16.14 (3.18) @ 2098 |
| Standard PTO Speed @ Eng Speed |
7.11 (26.90) & 16.49 (3.25) @ 2065 |
| Maximum PTO Power @ Eng RPM |
6.71 (23.39) & 16.35 (3.22) @ 2049 |
| Maximum Engine Power @ Eng RPM |
7.31 (27.67) & 13.23 (2.61) @ 2099 |
| Max Unballasted Drawbar Power @ Eng RPM |
7.10 (26.88) & 13.75 (2.71) @ 2053 |
| 75% Load, Full Engine RPM (Unballasted) |
6.14 (23.24) & 12.34 (2.43) @ 2140 |
| 75% Load @ Reduced RPM (Unballasted) |
5.62 (21.27) & 13.39 (2.64) @ 1653 |
| Transmission |
|
| Std. Transmission; Forward/Reverse |
9F/9R PowrReverser |
| Opt. Transmission; Forward/Reverse |
N/A |
| Reverser |
Base LH |
| On-the-Go Shifting (Yes/No/Partial) |
Yes |
| Clutch; Wet/Dry |
Wet |
| Creeper |
No |
| Power Take-Off (PTO) |
|
| Standard |
Independent 540/1000 |
| Optional |
N/A |
| PTO Speeds @ Engine RPM |
TBD-Nebraska Test |
| PTO Actuation |
TBD-Nebraska Test |
| Hydraulics |
|
| Type |
Open-Center |
| Pump Rated Output, GPM (L/min.) |
--- |
| Standard |
17.6 (66.6) Advertised |
| Optional |
N/A |
| Rated Flow @ One SCV, GPM (L/min.) |
N/A |
| Max Output @ SCV Couplers, GPM (L/min.) |
Neb. tested @ 18.5 (70.0) |
| Maximum Operating Pressure, PSI (kPa) |
2830 (19500) |
| Maximum Hydraulic Power, HP (kW) |
22.6 (16.8) |
| Hitch Draft Control Load Sense Type |
Lower-link |
| Remote Control Valves Available |
2 std., 3 opt. |
| Hitch Category (SAE Designation) |
Category II |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
--- |
| OECD |
--- |
| Standard |
6800 (3084) |
| Optional |
--- |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Sensing Type |
Mechanical |
| Joystick SCV Control |
Mid mount, opt. |
| Final Drive |
|
| Type |
Inboard Planetary |
| Differential Controls |
Mechanical |
| Availability |
--- |
| Front |
N/A |
| Front & Rear |
N/A |
| Engage On-the-Go Rear Differential Lock |
Yes |
| Axle Type |
Flanged |
| Brakes, Type and Control |
Mechanically actuated wet disk |
| Operator Station |
|
| Rollover Protective Structure, OOS |
Yes |
| Rigid - Foldable - Telescopic |
Foldable |
| Platform - Flat/Straddle |
Flat |
| Gearshift Location - Console/Floor |
Floor |
| Cab |
--- |
| Doors |
2 |
| Platform - Flat/Straddle |
Flat |
| dB(A) Rating |
Nebr. Tested @ 76.3 with Cab |
| Seat Suspension System |
Mechanical, Air opt. |
| 2WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Front Tread Range, in. (mm) |
N/A |
| Rear Tread Range, in. (mm) |
N/A |
| Minimum Rear Tread Setting, in. (mm) |
N/A |
| Front Axle Clearance, in. (mm) |
N/A |
| Turning Radius w/Brakes, ft. (m) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Unballasted Operating Weight, lb. (kg) |
N/A |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
N/A |
| MFWD Dimensions |
|
| Wheelbase, in. (mm) |
91 (2310) |
| Front Tread Range, in. (mm) |
59.7-79.4 (1516-2016) |
| Front Axle Clearance, in. (mm) |
18 (457) |
| Turning Radius w/Brakes, ft. (m) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
14.7 (4.5) @ 67.7 in. tread setting |
| Limited Slip Differential |
Yes |
| Unballasted Operating Weight, lb. (kg) |
N/A |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
8730 (3960); 9390 (4260) |
| 4WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Wheel Tread, Min. to Max. in. (mm) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Nebraska Test Unballasted w/Duals, lb.(kg) |
N/A |
| Unballasted Weight, lb. (kg) |
N/A |
| Standard Tires |
|
| 2WD |
--- |
| Front |
N/A |
| Rear |
N/A |
| MFWD |
--- |
| Front |
13.6-24 in., 6 PR R1 |
| Rear |
18.4-34 in., 8 PR R1 |
| 4WD |
N/A |
| Track Widths |
N/A |
| Miscellaneous |
|
| Country of Manufacture |
Saltillo, Mexico |
| Ballasting Restrictions, lb. (kg) |
Refer to Operator's Manual |
| *Notes |
Updated - 11/02/2009 |
| Specifications are based on published information at the time of publication.Specifications are subject to change without notice. |
|
| |
|
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted. |
|
