Specifications: 6230 Premium available from Washington Tractor, WA

 
ManufacturerJohn Deere
Model 6230 Premium Tractor
Key Specifications  
Official Test Nebraska Test Number OECD Test 2416 NE Test data for engine hp at 94 hp
Engine Manufacturer John Deere 4.5L PowerTech Plus (4-valve) engine, 4.5L PowerTech E (2-valve) engine
Performance Advertised PTO HP (kW) @ Rated RPM 79 (59) @ 2300 per SAE
Fuel Use, U.S. gal./hr. & HP hr./gal. 4.94 gal/hr; 15.5 Hp.hr/gal
Std. Transmission; Forward/Reverse PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve) engine
Power Take-Off (PTO) Standard Independent 540/1000 rpm w/ reversible shaft
Hydraulics Type Closed-center, Pressure and Flow Compensated
Final Drive Type Inboard Planetary
2WD Dimensions Wheelbase, in. (mm) 94.5 (2400)
MFWD Dimensions Wheelbase, in. (mm) 94.5 (2400)
Miscellaneous Country of Manufacture Mannheim, Germany
Official Test  
Nebraska Test Number OECD Test 2416 NE Test data for engine hp at 94 hp
Engine  
Manufacturer John Deere 4.5L PowerTech Plus (4-valve) engine, 4.5L PowerTech E (2-valve) engine
Aspiration Std. Variable Geometry Turbocharger with air-to-air aftercooling and exhaust gas recirculation
Cylinders/Displacement, cu. in. (liters) 4/276 (4.53)
Cylinder Liners Wet sleeve
Fuel Tank Cap., US Gal. (L) (Open; Cab) Cab
Standard 48 (182)
Optional N/A
Underhood muffler Yes
Performance  
Advertised PTO HP (kW) @ Rated RPM 79 (59) @ 2300 per SAE
Official PTO HP (kW) @ Rated RPM 76.6 (37.1) @ 2300
@ Standard PTO @ Eng RPM 83.5 (62.3) @ 2208
Maximum @ Eng RPM 90.9 (67.8) @ 1900
Advertised Engine HP (kW) @ Rated Speed 100 (75) @ 2300 per ISO 97/68/EC
Max Unballast Drwbr HP (kW) @ Eng RPM 67 (50) @2301
Maximum Torque (PTO) @ RPM, lb-ft (Nm) 252 (367) @ 1500
Max Torque Rise (80% Rtd Spd) @ Eng RPM 48% @ 1800
Maximum Torque Rise % (PTO) @ Eng RPM 54.8 @ 2300
Fuel Use, U.S. gal./hr. & HP hr./gal.  
PTO @ Rated Eng RPM 4.94 gal/hr; 15.5 Hp.hr/gal
Standard PTO Speed @ Eng Speed 5.10 gal/hr; 16.39 Hp.hr/gal
Maximum PTO Power @ Eng RPM 5.40 gal/hr; 16.84 Hp.hr/gal
Maximum Engine Power @ Eng RPM ---
Max Unballasted Drawbar Power @ Eng RPM 13.96 Hp.hr/gal
75% Load, Full Engine RPM (Unballasted) 12.23 Hp.hr/gal
75% Load @ Reduced RPM (Unballasted) 13.10 Hp.hr/gal
Transmission  
Std. Transmission; Forward/Reverse PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve) engine
Opt. Transmission; Forward/Reverse PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech E (2-valve); AutoQuad Plus 24/24 (25 mph/ 40kmh)
Reverser LH Base-Electronic
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper Available w/ PowrQuad Plus and AutoQuad Plus
Power Take-Off (PTO)  
Standard Independent 540/1000 rpm w/ reversible shaft
Optional Rear - 540/540E/1000 rpm, reversible shaft, shiftable in cab; (Front - 1000 rpm, 21 spline)
PTO Speeds @ Engine RPM 540 @ 2143; 1000 @ 2208
PTO Actuation Electrohydraulic
Hydraulics  
Type Closed-center, Pressure and Flow Compensated
Pump Rated Output, GPM (L/min.) ---
Standard 29 (109.8)
Optional N/A
Rated Flow @ One SCV, GPM (L/min.) 30.4 (115.2)
Max Output @ SCV Couplers, GPM (L/min.) 33.0 (124.8)
Maximum Operating Pressure, PSI (kPa) 2555
Maximum Hydraulic Power, HP (kW) 45.2
Hitch Draft Control Load Sense Type Electrohydraulic
Remote Control Valves Available Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic - 2-4
Hitch Category (SAE Designation) Standard II; (Opt. IIIN/II w/ telescopic draft links); (Opt. IIIN/2 w/ Walterscheid Hooks)
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. ---
OECD ---
Standard 4450
Optional N/A
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) ---
Standard N/A
Optional N/A
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) ---
Standard N/A
Optional N/A
Sensing Type Electronic Lower Link
Joystick SCV Control ---
Final Drive  
Type Inboard Planetary
Differential Controls Electrohydraulic
Availability ---
Front Yes
Front & Rear Yes
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flange- Base; Rack & Pinion-Opt.
Brakes, Type and Control hydraulically-actuated wet disk brakes
Operator Station  
Rollover Protective Structure, OOS N/A
Rigid - Foldable - Telescopic N/A
Platform - Flat/Straddle N/A
Gearshift Location - Console/Floor N/A
Cab ComfortGard Premium Cab w/ PowrQuad Plus, AutoQuad Plus; ComfortGard Premium Plus Cab w/ IVT
Doors 2
Platform - Flat/Straddle Flat
dB(A) Rating 72
Seat Suspension System Mechanical Seat w/ ComfortGard Premium Cab; Air Seat w/ ComfortGard Premium Plus Cab
2WD Dimensions  
Wheelbase, in. (mm) 94.5 (2400)
Front Tread Range, in. (mm) 58.5-96 (1485-2438)
Rear Tread Range, in. (mm) 63.1-90.6 (1604-2302)
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) 18.5 (469)
Turning Radius w/Brakes, ft. (m) N/A
Turning Radius w/o Brakes, ft. (m) TBD- Nebraska Test
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab 2WD - 9182 (4165)
MFWD Dimensions  
Wheelbase, in. (mm) 94.5 (2400)
Front Tread Range, in. (mm) 60-79.4 (1524-2016)
Front Axle Clearance, in. (mm) 18.5 (469)
Turning Radius w/Brakes, ft. (m) N/A
Turning Radius w/o Brakes, ft. (m) N/A
Limited Slip Differential Standard w/ MFWD and TLS II
Unballasted Operating Weight, lb. (kg) N/A
Approx. Ship Wgt, lb. (kg) Open; Cab 9678 (4390)
4WD Dimensions  
Wheelbase, in. (mm) N/A
Wheel Tread, Min. to Max. in. (mm) N/A
Turning Radius w/o Brakes, ft. (m) N/A
Nebraska Test Unballasted w/Duals, lb.(kg) N/A
Unballasted Weight, lb. (kg) N/A
Standard Tires  
2WD ---
Front N/A
Rear N/A
MFWD ---
Front 12.4 R-24
Rear 16.9 R-30
4WD N/A
Track Widths N/A
Miscellaneous  
Country of Manufacture Mannheim, Germany
Ballasting Restrictions, lb. (kg) Refer to Operators Manual
*Notes Updated - 03/05/2010
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.  
   
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.