| Manufacturer | John Deere |
| Model |
MY12 8360RT; 360 engine (288 PTO) hp |
| Official Test |
|
| Nebraska Test Number |
TBD - Nebraska Test |
| Engine |
|
| Manufacturer |
John Deere |
| Aspiration |
Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation |
| Cylinders/Displacement, cu. in. (liters) |
6/548 (9.0) |
| Cylinder Liners |
Wet |
| Fuel Tank Cap., US Gal. (L) (Open; Cab) |
--- |
| Standard |
200 (758) |
| Optional |
N/A |
| Underhood muffler |
N/A |
| Performance |
|
| Advertised PTO HP (kW) @ Rated RPM |
295 (220) @ 2100 per SAE |
| Official PTO HP (kW) @ Rated RPM |
TBD - Nebraska Test |
| @ Standard PTO @ Eng RPM |
TBD - Nebraska Test |
| Maximum @ Eng RPM |
TBD - Nebraska Test |
| Advertised Engine HP (kW) @ Rated Speed |
360 (265) @ 2100 per 97/68EC PS |
| Max Unballast Drwbr HP (kW) @ Eng RPM |
TBD - Nebraska Test |
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
TBD - Nebraska Test |
| Max Torque Rise (80% Rtd Spd) @ Eng RPM |
TBD - Nebraska Test |
| Maximum Torque Rise % (PTO) @ Eng RPM |
TBD - Nebraska Test |
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
| PTO @ Rated Eng RPM |
TBD - Nebraska Test |
| Standard PTO Speed @ Eng Speed |
TBD - Nebraska Test |
| Maximum PTO Power @ Eng RPM |
TBD - Nebraska Test |
| Maximum Engine Power @ Eng RPM |
TBD - Nebraska Test |
| Max Unballasted Drawbar Power @ Eng RPM |
TBD - Nebraska Test |
| 75% Load, Full Engine RPM (Unballasted) |
TBD - Nebraska Test |
| 75% Load @ Reduced RPM (Unballasted) |
TBD - Nebraska Test |
| Transmission |
|
| Std. Transmission; Forward/Reverse |
IVT |
| Opt. Transmission; Forward/Reverse |
N/A |
| Reverser |
Right hand with IVT |
| On-the-Go Shifting (Yes/No/Partial) |
Yes |
| Clutch; Wet/Dry |
Wet |
| Creeper |
Yes, IVT |
| Power Take-Off (PTO) |
|
| Standard |
1-3/4-in, 20 spline, 1000 |
| Optional |
N/A |
| PTO Speeds @ Engine RPM |
1000 @ 2003 |
| PTO Actuation |
Electrohydraulic |
| Hydraulics |
|
| Type |
Closed-center, pressure and flow compensated |
| Pump Rated Output, GPM (L/min.) |
--- |
| Standard |
44 (166.6) |
| Optional |
60 (227.1) |
| Rated Flow @ One SCV, GPM (L/min.) |
35 (132) |
| Max Output @ SCV Couplers, GPM (L/min.) |
TBD - Nebraska Test |
| Maximum Operating Pressure, PSI (kPa) |
2958 (20,400) |
| Maximum Hydraulic Power, HP (kW) |
TBD - Nebraska Test |
| Hitch Draft Control Load Sense Type |
Electrohydraulic |
| Remote Control Valves Available |
4 standard (3, 5 or 6 optional) |
| Hitch Category (SAE Designation) |
4N/3 |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
--- |
| OECD |
TBD - Nebraska Test |
| Standard |
20,000 (9702) |
| Optional |
15,000 (6803); Less hitch |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
--- |
| Standard |
N/A |
| Optional |
N/A |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
--- |
| Standard |
N/A |
| Optional |
N/A |
| Sensing Type |
Electrohydraulic |
| Joystick SCV Control |
N/A |
| Final Drive |
|
| Type |
Inboard planetary |
| Differential Controls |
N/A |
| Availability |
N/A |
| Front |
N/A |
| Front & Rear |
N/A |
| Engage On-the-Go Rear Differential Lock |
N/A |
| Axle Type |
Bar |
| Brakes, Type and Control |
Hydraulic wet disk |
| Operator Station |
|
| Rollover Protective Structure, OOS |
--- |
| Rigid - Foldable - Telescopic |
Rigid (cab) |
| Platform - Flat/Straddle |
Flat |
| Gearshift Location - Console/Floor |
CommandARM |
| Cab |
--- |
| Doors |
1 on left side |
| Platform - Flat/Straddle |
Flat |
| dB(A) Rating |
TBD - Nebraska Test |
| Seat Suspension System |
Air |
| 2WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Front Tread Range, in. (mm) |
N/A |
| Rear Tread Range, in. (mm) |
N/A |
| Minimum Rear Tread Setting, in. (mm) |
N/A |
| Front Axle Clearance, in. (mm) |
N/A |
| Turning Radius w/Brakes, ft. (m) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Unballasted Operating Weight, lb. (kg) |
N/A |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
N/A |
| MFWD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Front Tread Range, in. (mm) |
N/A |
| Front Axle Clearance, in. (mm) |
N/A |
| Turning Radius w/Brakes, ft. (m) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Limited Slip Differential |
N/A |
| Unballasted Operating Weight, lb. (kg) |
N/A |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
N/A |
| 4WD Dimensions |
|
| Wheelbase, in. (mm) |
99 (2515) |
| Wheel Tread, Min. to Max. in. (mm) |
72 (1828.8) - 120 (3048) standard (112 (2844.8) - 160 (4064) optional) |
| Turning Radius w/o Brakes, ft. (m) |
TBD |
| Nebraska Test Unballasted w/Duals, lb.(kg) |
TBD - Nebraska Test |
| Unballasted Weight, lb. (kg) |
35,160 (15,948) average shipping weight |
| Standard Tires |
|
| 2WD |
--- |
| Front |
N/A |
| Rear |
N/A |
| MFWD |
--- |
| Front |
N/A |
| Rear |
N/A |
| 4WD |
N/A |
| Track Widths |
25-in. standard (16-in., 18-in., 24-in., and 30-in. optional) |
| Miscellaneous |
|
| Country of Manufacture |
Waterloo, IA USA |
| Ballasting Restrictions, lb. (kg) |
Refer to operator's manual |
| *Notes |
Updated: 03/23/2011 |
| Specifications are based on published information at the time of publication.Specifications are subject to change without notice. |
|
| |
|
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted. |
|
