Specifications: 550 S4 available from Washington Tractor, WA

 
ManufacturerJohn Deere
Model Gator XUV 550 S4
Engine and Electrical  
Type 4-cycle gas, Dynamically tuned Carb
Cylinders V-Twin
Valving OHV
Horsepower* 16 (11.9 kw)*
Displacement 570 cc
Maximum torque, ft.-lb. (Nm) 28.6 (38.8) @ 2400 rpm
Iginition type Solid state 12V
Lubrication Full pressure
Oil filter Screw on filter
RPM, idle (no load) 1150
RPM, fast (no load) 4100
Cooling system Air cooled
Air cleaner Dry replaceable single element w/remote intake
Muffler Spark-arresting
Battery 340CCA
Alternator 16 amp @ 4100 rpm, regulated
Headlights Two 37.5 watt halogen
Fuel System  
Capacity, U.S. gal. (L) 4.9 (18.5)
Consumption (half load at avg. speed), U.S. gal./hr. (L/h) 0.8 (3.06)
Fuel pump type Pulse
4WD  
System Type Four-wheel drive system
Front Differential (Engagement) Limited Slip - lever engagement
Rear Differential (Engagement) Positive locking, mechanically actuated (hand-operated)
Transmission  
Type Continuously Variable Transmission (CVT) with clutch enclosure
Drive belt Spun top cog, 31 mm wide
Ground speed, mph (km/h) 0-28 (0-45) Hi Forward, 0-21 (0-34) Lo Forward, 0-16 (0-26) Reverse
Transaxle Two speed, oil bath
Gear Selection Forward (hi-lo), Netural, Reverse
Overall Reduction Ratio: ---
Low NA
High NA
Reverse NA
Brakes Four wheel hydraulic disk
Park brake Foot operated, mechanical disk
Bearings Sealed, double-row ball
Axle 27 mm dia., forged CV-shaft with Double Offset Joint
Suspension and Steering  
Suspension, front Fully Independent Dual A-Arm with adjustable coils
Front Susp. Travel (total), in. (mm) 9 (229)
Suspension, rear Independent; H-arm and control link with adjustable coil over shock
Rear Susp. Travel (total), in. (mm) 8 (203 mm)
Steering Rack and Pinion
Turning radius, ft. (m) 19.7 (6.0)
Hitch  
Front Optional 2-in receiver w-recovery loops
Rear Standard 2-in receiver
Occupant Protective System (OPS)  
Tubular overhead structure 1.75 in (44.4 mm) steel tube
Passenger grab handles Front OPS post, front dash
Seat belts 3-point seat belts
Certification SAE J2194 and OSHA ROPS
Ground Pressure (max):  
With 200-lb. Operator Only, psi (kg/cm2) NA
Fully Loaded Vehicle, psi (kg/cm2) NA
Ground Clearance  
Ground Clearance, in. (mm) 9.3 min (236)
Under Foot Platform, in. (mm) 9.3 min (236)
Dimensions  
Length (w/out bumper), in. (mm) 144 (3658)
Length (with bumper), in. (mm) 146(3708)
Width, in. (mm) 56.5 (1435)
Front-tread Centers, in. (mm) 48(1220)
Rear-tread Centers, in. (mm) 46(1170)
Height (overall with OPS), in. (mm) 74 (1880)
Wheelbase, in. (mm) 79 (2007)
Weight (incl. fuel/fluids), lb. (kg) 1455 (660)
Seating Capacity 4
Seat Type Professional high back bench
Towing Capacity, lb. (kg) 1100 (499)
Payload Capacity, lb. (kg) 1200 (544)
Sound rating (at operator's ear), dB(A) NA
Cargo Box  
Material High-density polyethylene copolymer composite
Capacity ---
Dimensions, in. (mm) 32.3L x 47.6W x 11.7D (82cm L x 120.9cm W x 29.7cm D)
Volume, cu. ft. (m3) 8.9 (0.25)
Weight, lb. (kg) 400 (181)
Dump 2-sided - Manual release (optional power lift)
Tailgate 1 handed release; Hinged at bottom; Removeable without tools
Tires  
Front 25x8-12 Ancla M-T (Extreme Terrain); 25x8-12 Terrahawk AT (All Terrain); Optional 25x8-12 Maxxis Bighorn 2.0
Rear 25x10-12 Ancla M-T (Extreme Terrain); 25x10-12 Terrahawk AT (All Terrain); Optional 25x10-12 Maxxis Bighorn 2.0
Turf & AT489 ---
All Trail II ---
Available Tread Types Ancla M-T (Extreme Terrain), Terrahawk AT (All Terrain), Maxxis BigHorn 2.0 Radials (Extreme Terrain) - Front: 25x8-12, Rear: 25x10-12
Color  
Options Green/Yellow, REALTREE HARDWOODS HD Camo
Notes  
Disclaimers *Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.  
 
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.